
Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor Shooters Cut 10" x 12" Plates | Stops .44
$69.99
$83.99
Proudly Manufactured in USA by our own craftsman
SOLD AS SINGLE PLATES Custom work and sizes are available by quote Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates. Weights ( individual plate) 11×14: 1 pounds 4 ounces 10×12 : 15 ounces 8×10 : 10.5 ounces 6×8 : 7 ounces 6×6 : 5.5 ounces
Features A stand alone armor plate with multiple hit capability 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Aramid soft armor plate design
Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and/or back protection Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

1
Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor Shooters Cut 8" x 10" Plates | Stops .44
$54.99
$65.99
Proudly Manufactured in USA by our own craftsman
SOLD AS SINGLE PLATES Custom work and sizes are available by quote Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates. Weights ( individual plate) 11×14: 1 pounds 4 ounces 10×12 : 15 ounces 8×10 : 10.5 ounces 6×8 : 7 ounces 6×6 : 5.5 ounces A stand alone armor plate with multiple hit capability 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Aramid soft armor plate design
Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and/or back protection Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

Caliber Armor CaliberX Soft Armor Side Plate Panels
$118.36
$139.90
Soft Body Armor Panel
5.75″x11.5″ (set of two) verified to fit Condor MOPC Gen II and EXO Gen II-S-M Cummerbund
5.75″X14″ (set of two) verified to fit Condor EXO Gen II L-XL Cummerbund
5″x14″ (set of two) verified to fit Chase Tactical MEAC and London Bridge Trading LBT 6094A Cummerbund
Lightweight, ultra thin CaliberX™ .19″ thick
Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2
Interior sewn together for longevity
TSA Approved
Proudly made in the U.S.A
Side Panels are sold in a set of two
Caliber Armor CaliberX Soft Armor Side Plate Panels
Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density.
We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death.
CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest.
CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma.
Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm.
CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.

1
Shellback Tactical Banshee 3.0 Level IIIA Model CLCIIIA Soft Armor Cummerbund Insert - Set of 2
from $254.99
$279.99
Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package
The Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package is specifically designed to fit the Banshee Elite 3.0 plate carrier. This ballistic package is NIJ 0101.06 certified, lightweight and provides ballistic protection against common hand gun rounds. Available in three different configurations: plate backer set of two, cummerbund insert set of two or the complete set. Stay protected and order the Shellback Tactical Level IIIA Model CLCIIIA Banshee Elite 3.0 Soft Armor Package today!
Specifications
Plate backers come in a Set of 2
Cummerbund inserts come in a Set of 2
Complete package option comes with 2 plate backers and 2 cummerbund inserts
Protection - Level IIIA multi hit stand alone against common handgun rounds
Testing Standards - NIJ 0101.06 Certified and listed on the NIJ compliant product list
Materials - Woven Aramid fibers
Aerial Density - 1.55 PSF
Thinness - .35"
Protective Cover - Sonobond sealed rip stop water resistant cover
Warranty - 5 year ballistic warranty
USA Made and Berry Compliant
Rounds Defeated
CARTRIDGE
PROJECTILE
VEL (ft/s ± 30)
VEL (m/s ± 9)
.357 SIG (NIJ06)
125 gr FMJ
1470
448
.44 Magnum (NIJ06)
240 gr SJHP
1430
436
.357 Magnum
158 gr JSP
1430
435
.44 Magnum
240 gr SWCGC
1400
426
9 x 19 mm Parabellum
124 gr FMJ RN
1400
426
40 S&W
180 gr FMJ
1155
352
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.

Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor Rectangle 10" x 12" Plates | Stops .44
$68.95
$89.99
Waterproof Level IIIA Body Soft Armor Plates - Stops .44 Magnum
Proudly Manufactured in USA by our own craftsman
Manufactured with our modern nylon welder to achieve a waterproof covering to protect the inner Kevlar for years of service
SOLD AS SINGLE PLATES
Custom work and sizes are available by quote
Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates.
Weights ( individual plate)
11x14: 1 pounds 4 ounces
10x12 : 15 ounces
8x10 : 10.5 ounces
6x8 : 7 ounces
6x6 : 5.5 ounces
Features
A stand alone armor plate with multiple hit capability
7/16" thick
100% waterproof covers - manufactured on a nylon welder
Will fit most common carrier vests ( We manufacturer a full line of carrier vests)
Aramid soft armor plate design
Fully tested by independent Lab
Rated for up to six hits from .44 magnum bullets
For front and/or back protection
Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers.
Tested by HP White laboratory
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor Shooters Cut 11" x 14" Plates | Stops .44
$84.99
$101.99
Proudly Manufactured in USA by our own craftsman
SOLD AS SINGLE PLATES Custom work and sizes are available by quote Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates. Weights ( individual plate) 11×14: 1 pounds 4 ounces 10×12 : 15 ounces 8×10 : 10.5 ounces 6×8 : 7 ounces 6×6 : 5.5 ounces
Features A stand alone armor plate with multiple hit capability 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Aramid soft armor plate design
Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and/or back protection Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor 6" x 6" Plates | Stops .44
$29.99
$35.99
Proudly Manufactured in USA by our own craftsman
SOLD AS SINGLE PLATES
Custom work and sizes are available by quote
Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates. Weights ( individual plate) 11×14: 1 pounds 4 ounces 10×12 : 15 ounces 8×10 : 10.5 ounces 6×8 : 7 ounces 6×6 : 5.5 ounces
Features A stand alone armor plate with multiple hit capability 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Aramid soft armor plate design Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and/or back protection Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor Rectangle 8" x 10" Plates | Stops .44
$54.99
$65.99
Proudly Manufactured in USA by our own craftsman
SOLD AS SINGLE PLATES Custom work and sizes are available by quote Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates. Weights (individual plate) 11×14: 1 pounds 4 ounces 10×12 : 15 ounces 8×10 : 10.5 ounces 6×8 : 7 ounces 6×6 : 5.5 ounces
Features
A stand alone armor plate with multiple hit capability 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Aramid soft armor plate design
Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets
For front and/or back protection Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

Spartan Armor Systems Tactical Level IIIA Certified Wraparound Vest
$598.49
$629.99
Spartan Armor has stepped up the game for our customers! We have constructed a wraparound vest that is 1000 denier material, extremely durable and comfortable while still protecting whats yours. Spartan Armor Systems International Tactical Level IIIA Certified Wraparound Outer Carrier is designed for streamlined use in the field. This carrier can be a standard Level IIIA Protection or you can add in a rifle rated ballistic insert up to a 10x12 plate. This carrier is fully adjustable at the shoulder straps as well as the side closures.
Specifications:
Constructed of durable 1000 denier
Modular system with the capability to accommodate additional accessories
Front and Back Pockets (will hold our 10x12 Steel Core Plates as well as the Composite/Ceramic Plates)
Shoulder straps are fully adjustable for fitment while being able to keep your carrier on
Side closure cummerbund
Heavy-duty drag handle
Front and Back ID attachment platforms measuring 10.5" x 3"
Sizing Options:
Small
Medium
Large
X-Large
XX-Large
Ballistic Specifications: This product is NIJ Certified under the Level IIIA Specifications
Rated to stop .44 MAG SJHP, as well as Special Threat Rated to stop a .357 SIG FMJ. This soft armor can be used stand-alone, giving level IIIA protection or ICW (in conjunction with) as a backer on any of hard armor systems.
All parts of this product are proudly American made.

Caliber Armor CaliberX IIIa Soft Body Armor Panel
from $75.96
$94.95
Caliber Armor CaliberX IIIa Soft Body Armor Panel
Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density.
We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death.
CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest.
CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma.
Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm.
CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.

Shellback Tactical Banshee Level IIIA Model CLCIIIA Soft Armor Plate Backer - Set of 2
from $269.99
$294.99
Shellback Tactical Level IIIA Model CLCIIIA Soft Armor Package
The Shellback Tactical Level IIIA Model CLCIIIA Soft Armor Package is specifically designed to fit our Shellback Tactical plate carriers. This ballistic package is NIJ 0101.06 certified, lightweight and provides ballistic protection against common hand gun rounds. Available in two different configurations: plate backer set of two or cummerbund inserts set of two. Stay protected and order the Shellback Tactical Level IIIA Model CLCIIIA Soft Armor Package today!
Specifications
Plate backers - come in a set of two
Sizes
Small - 8.75" Wide x 11.75" Tall
Medium - 9.5" Wide x 12.5" Tall
Size Medium fits the following
Banshee Rifle PC
Banshee Elite 2.0 PC
Stealth Low Viz PC
Patriot PC
Shield PC
Skirmish PC
Rampage PC
Defender 2.0
Large - 10.25" Wide x 13.25" Tall
XLarge - 11" Wide x 14" Tall
Cummerbund Inserts - come in a set of two
Size
13.75" Wide x 5.50" Tall
Protection - Level IIIA multi hit stand alone against common handgun rounds
Testing Standards - NIJ 0101.06 Certified and listed on the NIJ compliant product list
Materials - Woven Aramid fibers
Aerial Density - 1.55 PSF
Thinness - .35"
Protective Cover - Sonobond sealed rip stop water resistant cover
Warranty - 5 year ballistic warranty
USA Made and Berry Compliant
Ballistic Protection
Rounds Defeated
CARTRIDGE
PROJECTILE
VEL (ft/s ± 30)
VEL (m/s ± 9)
.357 SIG (NIJ06)
125 gr FMJ
1470
448
.44 Magnum (NIJ06)
240 gr SJHP
1430
436
.357 Magnum
158 gr JSP
1430
435
.44 Magnum
240 gr SWCGC
1400
426
9 x 19 mm Parabellum
124 gr FMJ RN
1400
426
40 S&W
180 gr FMJ
1155
352
LEGAL
THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.
DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL.

Tactical Scorpion Gear Level IIIA 3A Soft Body Armor Inserts for Wildcat Vest Plate Carrier Scorpion
$184.95
$221.94
Level IIIA 3A Soft Body Armor Inserts for Wildcat Vest Plate Carrier Scorpion
IIIA Soft Armor inserts for the Tactical Scorpion Gear Wildcat armor carrier vest.
Tactical Scorpion Gear has taken the armor plate carrier to the next level. We have produced these level IIIA soft armor inserts to fit in our Wildcat series carrier vests.
These inserts provide protection to Level IIIA NIJ standards.
These inserts measure at 13” X 14.5” providing far more coverage than the standard 10x12 plates.
They are custom made by our craftsmen to fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates. They may be used as stand alone level IIIA protection or behind your hard plates adding extra protection from spalling and trauma. With a weight of 2 pounds 11 ounces, They can be worn for long periods of time without exhaustion unlike the heavy hard plates.
A stand alone armor plate with multiple hit capability Made in USA Lightweight soft flexible comfortable Material 7/16" thick Will fit our Wildcat series carrier vests Soft armor plate design Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and back protection Plate panel Sizes:
Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**

Tactical Scorpion Gear Body Armor Level IIIA Soft Aramid Inserts for Muircat Carrier
$283.00
$339.60
Tactical Scorpion Gear Level IIIA Inserts for the Muircat MOLLE Vest - IIIA Soft Armor inserts for the Tactical Scorpion Gear Muircat armor carrier vest.
Tactical Scorpion Gear has taken the armor plate carrier to the next level. We have produced these level IIIA soft armor inserts to fit in our Muircat series carrier vests.
These inserts provide protection to Level IIIA NIJ standards.
These inserts provide full coverage for front , rear and sides providing far more coverage than the standard 10x12 plates.
They are custom made by our craftsmen to fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates.
They may be used as stand alone level IIIA protection or behind your hard plates adding extra protection from spalling and trauma.
With a weight of 4 pounds 3 ounces, They can be worn for long periods of time without exhaustion unlike the heavy hard plates.
Features
A stand alone armor plate with multiple hit capability
Made in USA
Lightweight soft flexible comfortable Material
7/16" thick
Will fit our Muircat series carrier vests
Soft armor plate design
Fully tested by independent Lab
Rated for up to six hits from .44 magnum bullets
For front and back protection
Plate panel Sizes:
Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
Item Specifications
Protection Against: Ballistic
Type: Plates & Plate Carrier
Threat Level Rating: III-A

Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor 6" x 8" Plates | Stops .44
$44.99
$53.99
Proudly Manufactured in USA by our own craftsman
SOLD AS SINGLE PLATES Custom work and sizes are available by quote Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates. Weights ( individual plate) 11×14: 1 pounds 4 ounces 10×12 : 15 ounces 8×10 : 10.5 ounces 6×8 : 7 ounces 6×6 : 5.5 ounces Features
A stand alone armor plate with multiple hit capability 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Aramid soft armor plate design Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and/or back protection Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

Tactical Scorpion Gear Waterproof Level IIIA Soft Body Armor Rectangle 11" x 14" Plates | Stops .44
$84.99
$101.99
Proudly Manufactured in USA by our own craftsman
SOLD AS SINGLE PLATES Custom work and sizes are available by quote Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our soft type plates. Weights ( individual plate) 11×14: 1 pounds 4 ounces 10×12 : 15 ounces 8×10 : 10.5 ounces 6×8 : 7 ounces 6×6 : 5.5 ounces Features
A stand alone armor plate with multiple hit capability 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Aramid soft armor plate design
Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and/or back protection Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.

Tactical Scorpion Gear For Voodoo Tactical 20-9099 Vest Carrier IIIA 3A Soft Body Armor Plate Inserts
$319.95
$383.94
Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-9099 series Tactical Heavy Plate Carrier vest.
( Carrier vest displayed in photos is not included)
Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers.
This set of two soft inserts provides protection to Level IIIA NIJ standards.
These inserts measure at 16" X 25" and 14" x 25" providing far more coverage than the standard 10x12 plates.
Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates.
They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma.
With a weight of approximately 4.3 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time.
Features
This is a set of matching front and back stand-alone armor panels with multiple hit capability
Made in the USA
Lightweight, soft, flexible, comfortable material
Inserts are custom made to fit the Voodoo Tactical Heavy Carrier vest, model number 20-9099
7/16" thick
Fully tested by independent lab
Rated for up to six hits from .44 magnum bullets
Two panels provide both front and back protection and limited side protection
Plate panel Sizes:
Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
Item Specifications
Type: Plates
Threat Level Rating: III-A
Color: Black
Style: Soft Level IIIA Body Armor Plates
Model: Voodoo 20-9099 Vest Body Armor Plates

Tactical Scorpion Gear For Voodoo Tactical 20-0097 Vest Carrier IIIA 3A Soft Body Armor Plate Inserts
$213.95
$256.74
Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-0097 series Hayden Tactical Plate Carrier vest.
( Carrier vest displayed in photos is not included)
Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers.
This set of two soft inserts provides protection to Level IIIA NIJ standards.
These inserts measure at 15" X 16" providing far more coverage than the standard 10x12 plates.
Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates.
They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma.
With a weight of approximately 2.8 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time.
Features
This is a set of matching front and back stand-alone armor panels with multiple hit capability
Made in the USA
Lightweight, soft, flexible, comfortable material
Inserts are custom made to fit the Voodoo Tactical Hayden Carrier vest, model number 20-0097
7/16" thick
Fully tested by independent lab
Rated for up to six hits from .44 magnum bullets
Two panels provide both front and back protection and limited side protection
Plate panel Sizes:
Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
Item Specifications
Type: Plates
Threat Level Rating: III-A
Color: Black
Style: Soft Level IIIA Body Armor Plates
Model: Voodoo 20-0097 Vest Body Armor Plates

Tactical Scorpion Gear For Voodoo Tactical 20-0096 Vest Carrier IIIA 3A Soft Body Armor Plate Inserts
$180.48
$216.58
Tactical Scorpion Gear IIIA Soft Armor inserts for the Voodoo 20-0096 series Lightweight Tactical Plate Carrier vest.
( Carrier vest displayed in photos is not included)
Tactical Scorpion Gear helps you take your Voodoo Tactical armor plate carrier to the next level with these level IIIA soft armor inserts custom designed to fit the Voodoo Tactical Lightweight plate carriers.
This set of two soft inserts provides protection to Level IIIA NIJ standards.
These inserts measure at 11" X 13" and 16" x 14" providing far more coverage than the standard 10x12 plates.
Custom made by our craftsmen, our armor inserts fit perfectly in the liner section of the carrier vests leaving the regular armor plate pockets available for the insertion of Level III or IV standard 10x12 plates.
They may be used as stand-alone level IIIA protection or behind your hard plates, adding extra protection from spalling and trauma.
With a weight of approximately 2.5 pounds, they are significantly lighter than steel plates and can be comfortably worn for long periods of time.
Features
This is a set of matching front and back stand-alone armor panels with multiple hit capability
Made in the USA
Lightweight, soft, flexible, comfortable material
Inserts are custom made to fit the Voodoo Tactical Lightweight Carrier vest, model number 20-0096
7/16" thick
Fully tested by independent lab
Rated for up to six hits from .44 magnum bullets
Two panels provide both front and back protection and limited side protection
Plate panel Sizes:
Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping.
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
Item Specifications
Type: Plates
Threat Level Rating: III-A
Color: Black
Style: Soft Body Armor Plates
Model: Voodoo 20-0096 Carrier Vest Body Armor Plates

1
Tactical Scorpion Gear 014 Level IIIA Concealable Soft Armor Shirt, Soft Armor, NIJ Compliant
$259.95
$279.95
Level IIIA Concealable Armor Bulletproof Ballistic Shirt TSG-014
The Armor Plates are :
Armor plates made In USA by our own Craftmen
Tactical Scorpion Gear Level IIIA Concealable Shirt . This Shirt provides protection for the Front and Back. specially shaped soft aramid plates provide more protection than standard 10x12 plates
Meets full Level IIIA compliance
The product is corrosion-resistance . Great low temperature resistant performance
Material : made of special spandex blend which provides breath-ability. Material will stretch to provide a snug fit to the body making it virtually unnoticable
Quality: Protection Level tested according to newest US NIJ protection Level: US NIJ 0101.06 IIIA
Removable inner armor plates making it washable
Fabric: spandex blend
Stretchable for snug fit to the body making it virtually unnoticable
Armor plates made in USA
Armor material: Teijin aramid
SKU # TSG-014
TSG-014
Panel Size
Front Panel L x W & Length From Neck Down
Back Panel L x W
Medium
11” x 12.75” (11.5” at neck)
10” x 14.5”
Large
12” x 13” (11.5” at neck)
11” x 14.5”
Xlarge
12 5/8” x 14.5” (13” at neck)
12” x 15”
** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**
NIJ tested Level IIIA Armor will defeat 6 pistol round shots up to .44 Mag HP – 1430 fps at 5 meters
Protection Level
Testing Bullets
Weight of Bullet
Speed of Bullet
Shot Distance
Effective Shots
I
.380ACP FMJ RN
6.2/95
322/1055
5m
6
.22 LRHV Lead
2.6/40
329/1080
5m
6
II A
40S&W FMJ
11.7/180
322/1055
5m
6
9MM FMJ RN
8.0/124
341/120
5m
6
II A
.357 Mag JSP
10.2/158
436/1430
5m
6
.9mm FMJ RN
8.0/124
367/1205
5m
6
IIIA
.44 Mag HP
8.0/124
436/1430
5m
6
9MM FMJ RN
15.6/240
436/1430
5m
6
III
7.62mm NATO M80 FMJ
9.6/148
838/2780
15m
6
IV
7.62mm Caliber M2 AP
1.8/166
869/2880
15m
1

Caliber Armor CaliberX IIIa Body Armor Panels For Exo Carrier
from $430.40
$538.00
Caliber Armor CaliberX IIIA Body Armor Panels For Exo Carrier
Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density.
We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death.
CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest.
CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma.
Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm.

Caliber Armor CaliberX Ultra Light Weight Soft Armor With Concealment Carrier
from $273.48
$341.85
Soft Body Armor Panel available in 10×12 and 11×14 options
SAPI style cut
Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz
Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2
Waterproof
Interior sewn together for longevity
Proudly made in the U.S.A
Features
Removable cummerbund with double layer Mil-Spec Velcro®
Two (2) internal pouches on each side of cummerbund
Fully adjustable shoulder straps
Large soft side Velcro® area for placards
Made with Mil-Spec IR Treaded 500D Cordura®
Mil-Spec IR Treated Murdock Webbing®
All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible
Weight 1 lb
Available in: Black, Coyote Tan, Ranger Green and MultiCam®
The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans.
Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels
Caliber Armor CaliberX Ultra Light Weight Soft Armor With Concealment Carrier
Soft Body Armor Panel available in 10×12 and 11×14 options
SAPI style cut
Lightweight CaliberX™ 10×12 15.8oz, 11×14 1lb 4oz
Rated and tested to: NIJ STD-0101.06 Level IIIA and NIJ STD-0101.07 (Draft) HG2
Waterproof
Interior sewn together for longevity
Proudly made in the U.S.A
Caliber Armor manufacturers our CaliberX™ Soft Armor line of body armor inserts from the very best para-aramid materials on the market. They are bullet resistant and waterproof. We have created an affordable soft armor system that meets the gold standard of 1lb per sqft areal density.
We’ve partnered with DuPont to develop the next generation of a stronger, lighter soft armor system. We chose to work with Dupont Kevlar® fibers in our CaliberX™ Soft Armor because DuPont constantly upgrades and improves Kevlar®. We have fully maximized the material’s potential and made it more comfortable and lighter for the wearer. Our CaliberX™ ballistic vests offer better flexibility and comfort, greatly improving response time in a critical moment which could mean the difference between life and death.
CaliberX™ Soft Armor has 10% less weight and has 15% less back face deformation than other commercially available soft armor systems. This directly translates into less blunt force trauma to vest wearers. While 10% might not sound like much, we know that when you have all the extra gear to wear you are grateful for a lighter vest.
CaliberX™ achieves protection against high performance hand guns such as the .44 Magnum, .357 Sig, and the .9 mm using less material. CaliberX™ Soft Armor fibers absorb the energy of the bullet along the molecules of each fiber, catching it in a multi-layer web of unidirectional fabric. The fibers absorb and disperse the energy of the impact to underlying fibers in the insert that help reduce the amount of transferred energy that causes the back-face deformation which can cause blunt trauma. The final inner layers of material are able to disperse the energy and helps diminish any trauma.
Our super-lightweight CaliberX™ Soft Armor system provides consistent and uniform ballistic performance and can easily withstand multiple hits from handguns as powerful as the .44 Magnum. With unparalleled ballistic protection, lightweight comfort, superior strength, you can count on CaliberX™ inserts to help keep you safe from harm.
CaliberX™ lightweight soft armor is also great for backpacks, briefcases and larger purses. Ask us about custom sizing.
NIJ STANDARD-0101.06 and .07
Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard- 0101.06 IIIA and 0101.07 HG2
MANUFACTURING TOLERANCES:
Thickness dimensions are +-1/8 in. Width and length dimensions are +0.00 to 0.25 in. All weights are +- 5%.
Low-Visibility Plate Carrier
This Low-Visibility Plate Carrier is low profile and designed to endure and outlast any mission. It is fully adjustable for size, comfort, and protection. The sides are made from double layer Mil-Spec elastic and incorporates two internal pouches on each side which can hold magazine pouches and/or communication tools. The shoulder and sides of the Low-Visibility Plate Carrier are fully adjustable with Velcro® closures.
Features
Removable cummerbund with double layer Mil-Spec Velcro®
Two (2) internal pouches on each side of cummerbund
Fully adjustable shoulder straps
Large soft side Velcro® area for placards
Made with Mil-Spec IR Treaded 500D Cordura®
Mil-Spec IR Treated Murdock Webbing®
All of the fabrics, webbing and plastic hardware are treated at source to deliver the lowest I.R. signature possible
Weight 1 lb
Available in: Black, Coyote Tan, Ranger Green and MultiCam®
The Low-Visibility Plate Carrier is made with high quality U.S. Mil-Spec sourced materials and designed by U.S. Veterans.
Sizing:Regular: Fits 10×12” plates or soft armor panelsX-Large: Fits 11×14 plates or soft armor panels

AR500 Armor Soft Body Armor
from $80.99
$83.00
Our Rimelig option is made of p-Aramid Fibers and is available at both Level II and Level IIIA protection levels, which both provide multi-hit protection. The Rimelig is the most budget option of the three, making it a solid entry-level soft armor option, while still staying true to the goal of soft armor: Reliable lightweight protection, at just 0.45” thick and weighing 1.24 pounds.
The next level up is the Slim, which is made of two separate Aramid laminates joined together for greater strength. The symmetrical design of our Slim armor gives it a bidirectional capability, meaning it's perfect for use in a backpack, where you might use it on your back, or in front of you as a shield (slim armor panels will still have a "strike face" label, though it will be equally effective from either side, making it perfect for use in armored backpacks or bags). It provides Level IIIA protection and is only 0.36” and 1.25 pounds in our 10x12 ASC model.
Finally, for our most advanced option, the Hybrid is constructed from industry-leading materials from Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers. The exceptional quality of these materials makes for an especially capable panel. The result is an ultra-thin and ultra-light piece of soft armor at 0.25” thick, 1.04 pounds.
SPECIFICATIONS
Material
Rimelig: p-Aramid Fibers
Slim: two separate Aramid
Hybrid: Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers
Protection
Level II (Rimelig): 124-grain 9mm FMJ RN bullets with a velocity of 1305 ft/s (± 30 ft/s) and with 158-grain .357 Magnum Jacketed Soft Point (JSP) bullets with a velocity of 1430 ft/s (± 30 ft/s)
Level IIIA (Rimelig, Slim & Hybrid): 125-grain .357 SIG FMJ flat-nose bullets with a velocity of 1470 ft/s (± 30 ft/s) and with 240-grain .44 Magnum Semi-Jacketed Hollow Point (SJHP) bullets with a velocity of 1430 ft/s (± 30 ft/s)
Capability: Multi-hit protection
Dimensions (chart below)
Shelf life: 5 years
Manufactured: United States
AR500 Armor Soft Body Armor
For lightweight protection that’s easy to carry, AR500 Armor’s soft armor (specifications below) options give you the most value for the least sacrifice in affordability and stopping power.
Multiple soft armor types are available to choose from, each of which uses a different soft armor material with different weights and protection levels. However, there are similarities across each option: Every panel is either rated at Level II and Level IIIA (two handgun threat levels from the NIJ recommendations). Every soft armor panel is cut, sewn, and assembled in-house. And, like ceramic and polyethylene hard armor, these panels all have a 5-year shelf life.
Our Rimelig option is made of p-Aramid Fibers and is available at both Level II and Level IIIA protection levels, which both provide multi-hit protection. The Rimelig is the most budget option of the three, making it a solid entry-level soft armor option, while still staying true to the goal of soft armor: Reliable lightweight protection, at just 0.45” thick and weighing 1.24 pounds.
The next level up is the Slim, which is made of two separate Aramid laminates joined together for greater strength. The symmetrical design of our Slim armor gives it a bidirectional capability, meaning it's perfect for use in a backpack, where you might use it on your back, or in front of you as a shield (slim armor panels will still have a "strike face" label, though it will be equally effective from either side, making it perfect for use in armored backpacks or bags). It provides Level IIIA protection and is only 0.36” and 1.25 pounds in our 10x12 ASC model.
Finally, for our most advanced option, the Hybrid is constructed from industry-leading materials from Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers. The exceptional quality of these materials makes for an especially capable panel. The result is an ultra-thin and ultra-light piece of soft armor at 0.25” thick, 1.04 pounds.
SPECIFICATIONS
Material
Rimelig: p-Aramid Fibers
Slim: two separate Aramid
Hybrid: Honeywell Spectra Shield®, Honeywell Gold Shield®, and other ballistic fabric from respected manufacturers
Protection
Level II (Rimelig): 124-grain 9mm FMJ RN bullets with a velocity of 1305 ft/s (± 30 ft/s) and with 158-grain .357 Magnum Jacketed Soft Point (JSP) bullets with a velocity of 1430 ft/s (± 30 ft/s)
Level IIIA (Rimelig, Slim & Hybrid): 125-grain .357 SIG FMJ flat-nose bullets with a velocity of 1470 ft/s (± 30 ft/s) and with 240-grain .44 Magnum Semi-Jacketed Hollow Point (SJHP) bullets with a velocity of 1430 ft/s (± 30 ft/s)
Capability: Multi-hit protection
Dimensions (chart below)
Shelf life: 5 years
Manufactured: United States
Product Comparisons
Body Armor
Thickness (all)
10"x12"
11"x14"
11"x15" (backpack)
II Rimelig
0.45"
1.24 lbs
n/a
n/a
IIIA Rimelig
0.55"
1.43 lbs
1.75 lbs
1.95 lbs
IIIA Slim
0.36"
1.25 lbs
1.54 lbs
1.76 lbs
IIIA Hybrid
0.25"
1.04 lbs
1.30 lbs
1.47 lbs

2
Body Armor Direct Soft Armor Inserts
from $620.00
Fits concealable, tactical and tank top carriers
Includes Certified NIJ IIIA Soft Armor
Now black in color!
5 year limited warranty
WHAT IS INCLUDED:
1 Qty. set of soft armor (front and back that fully wrap the sides)
Soft Armor Inserts
In June of 2020 we introduced new removable inserts for our soft armor that are lower in weight. Now we offer our standard weight as light and the new lighter and lightest options. All are Certified Level IIIA by the National Institute of Justice with similar performance. The Lighter and Lightest provide special threat protection. In the world of body armor the more you spend the less in weight it gets. Our Lightest option is the best by far!
Fits concealable, tactical and tank top carriers
Includes Certified NIJ IIIA Soft Armor
Now black in color!
5 year limited warranty
➠ View Ballistics Test Report➠ View Ballistics Specification➠ View Compliance Letter
Weight in Lbs.
Size
Light
Lighter
Lightest
Sq. Inches of Ballistics
Small
5.6
4.3
3.1
374
Medium
6.2
4.7
3.4
421
Large
6.5
5.0
3.6
447
XL
6.9
5.3
3.8
481
2XL
7.2
5.5
4.0
504
3XL
8.2
6.3
4.5
588
4XL
8.7
6.7
4.8
631
5XL
9.8
7.5
5.4
707
Thinness
Light
0.35 inch
Lighter
0.25 inch
Lightest
0.21 inch
WHAT IS INCLUDED:
1 Qty. set of soft armor (front and back that fully wrap the sides)

Body Armor Direct BUNDLE #2: All American Vest, IIIA Soft Inserts, 2 Level III ICW Rifle Plates & Armor Carry Bag
from $1,099.00
What’s Included
1 All American Vest
Front and Back NIJ Certified IIIA Soft Armor Inserts
Front and Back NIJ Certified III ICW Plates
1 Armor Carry Bag
Body Armor Direct BUNDLE #2: All American Vest, IIIA Soft Inserts, 2 Level III ICW Rifle Plates & Armor Carry Bag
This Armor Bundle includes our All American Vest, Front and Back Wraparound NIJ Certified IIIA Soft Armor Inserts, Front and Back NIJ Certified Level III ICW Rifle Plates, and our Armor Carry Bag. We created this combination to be a complete set of our best soft armor in conjunction with hard armor plates in a high performance vest.
The All American Vest is our low profile high performance concealable vest that’s designed for user efficiency and maximum coverage. The included soft inserts are available in three different weight/thickness options to suit your individual needs while the included hard armor plate’s multi curve design fits to the contours of the body for maximum comfort and added ballistic protection. The super rigid Armor Carry Bag’s reinforced construction will get your gear from A to B with ease.
What’s Included
1 All American Vest
Front and Back NIJ Certified IIIA Soft Armor Inserts
Front and Back NIJ Certified III ICW Plates
1 Armor Carry Bag
Specifications
Size
Light (.35”)
Lighter (.25”)
Lightest (.21”)
Sq. Inches of Ballistics
Small
5.6 lbs
4.3 lbs
3.1 lbs
374”
Medium
6.2 lbs
4.7 lbs
3.4 lbs
421”
Large
6.5 lbs
5.0 lbs
3.6 lbs
447”
XL
6.9 lbs
5.3 lbs
3.8 lbs
481”
2XL
7.2 lbs
5.5 lbs
4.0 lbs
504”
3XL
8.2 lbs
6.3 lbs
4.5 lbs
588”
4XL
8.7 lbs
6.7 lbs
4.8 lbs
631”
5XL
9.8 lbs
7.5 lbs
5.4 lbs
707”