Tactical Scorpion Gear - Level III AR500 / Lightweight Level III+ Steel Body Armor 10
Tactical Scorpion Gear Level III AR500 / Lightweight Level III+ Steel Body Armor 10" x 12" Plate from $44.42 $49.45
Your choice of Level III AR500 or Lightweight Level III+ steel core armor plates. Tactical Scorpion Gear AR500 steel core armor .(Made in the USA) A stand alone armor plate with multiple hit capability We only manufacture our plates from certified AR-500 steel with a Brinnell Hardness Rating of505-518BHN Laser cut Fully tested by independent Lab Rated for up to six hits from 7.62 Nato bullets (.308 Winchester) with velocities up to 2780 fps Tactical Scorpion Gear Level III+ steel plate armor . (Made in the USA) We are Compliant with all NIJ standards so dont pay more for lesser quality products. A stand alone armor plate with multiple hit capability - passed NIJ 0101.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) at 2800fps and 5.56 M193 55 Grain FMJ at 2900fps. In house testing defeated 30-06 165 grain copper tip trophy. Listed on the Department of Justice NIJ certification website. Level 3+ plates are manufactured from a proprietary steel reaching Brinnell Hardness ratings in 600 - 630 Laser cut Simply Stronger, Thinner and lighter than the competition Our new proprietary steel core is far stronger than the AR500 - AR650 steel core. This core is hardened all the way through unlike the AR500 - AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength. Our build-up spall coating is done with a Graco EXP-2 which is the top of the line high pressure heated coating system. Our plate core is chemically washed and etched on the strike surface to eliminate the coating from delaminating when shot which keeps the shrapnel from escaping from the armored assembly Tactical Scorpion Gear 10 mm Trauma Pad Custom made , computer cut on triple axis CNC router machine to perfectly match our armor plate Will absorb the impression of any projectile impact onto the armor plate protecting your ribs from the compression ** This model complies with NIJ Standard-0101.06 for Ballistic resistance of Body Armor.** We utilize a CNC laser cutting table for the cutting of all our Steel core products. If the seller of armor plate does not mention how its cut, then you can guarantee its not by laser There is no equal method Plasma cutting cuts slowly, this puts a lot of heat into the steel. ( Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the target, softening it's edges. The heat-affected zone (HAZ) generated by plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to other methods. Here at Tactical Scorpion Gear we manufacture our own vest carriers, Kevlar level IIIA vests and all our products. We have every item listed Available and ready for immediate shipping. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level III Armor will defeat 6 rifles round shots up to 7.6251/.308 @ 2780 ft/s @ 15 METERS Level III+ lightweight base coated 6x6: 33 ounces 6x8: 44 ounces 8x10: 70 ounces 10x12: 103 ounces 10x12 modified: 88 ounces 11x14: 138 ounces Level III AR500 base coated 6x6: 42 ounces 6x8: 53 ounces 8x10: 83 ounces 10x12: 126 ounces 10x12 modified: 115 ounces 11x14: 178 ounces Level III+ lightweight spall coated 6x6: 39 ounces 6x8: 52 ounces 8x10: 80 ounces 10x12: 119 ounces 10x12 modified: 104 ounces 11x14: 157 ounces Level III AR500 spall coated 6x6: 47 ounces 6x8: 64 ounces 8x10: 98 ounces 10x12: 150 ounces 10x12 modified: 129 ounces 11x14: 204 ounces
Caliber Armor AR550 III+ Multi-Curve Steel Body Armor With Bullet Liner Spall Coat
Caliber Armor AR550 III+ Multi-Curve Steel Body Armor With Bullet Liner Spall Coat from $99.95 $109.95
Weights for AR550 Steel Body Armor: 10 x 12 – 8 lb 7 oz with Anti-Spall Coating 8 x 10 – 5 lb 14.8 oz with Anti-Spall Coating 11 x 14 – 9 lb 13.3 oz with Anti-Spall Coating Caliber Armor AR550 III+ Multi-Curve Steel Body Armor With Bullet Liner Spall Coat This can be seen with our bend process, our fragmentation coating and our finishing details. This was the material that we started from and have the most experience with. We’ve seen it, done it, we’ve improved it. Steel Body Armor provides great protection that can stop multiple projectile hits. We have been working with different levels of abrasion resistant (AR) ballistic steel for years and have not found a better product than our AR550 Steel Body Armor Plates. This armor is rated at a level III+ as it can defeat special threats like M855 rounds. All of our steel plates come in one ergonomic curve option. We have worked with LE and first responders to design a curve that you can be comfortable wearing. We provide this at no additional cost. What is unique about the way that we bend our steel is important too. We have designed a press that creates a multi curve bend in ONE step. Why is this important? When you do multiple bends to achieve a multi curve, it puts extra strain on the plate which can weaken it. We have replicated the same curves that you have seen in multi curve ceramic armor for years. Our aggressive Shooters Cut body armor plates shaves off weight while still providing enough coverage to protect your vital organs. Use our CaliberX™ Soft Armor Backers for even more protection and comfort. Our standard AR550 plate comes coated to protect the plate from rust and the elements. One concern with Steel Armor is fragmentation containment. Some of that fragmentation is contained in the armor’s plate carrier, but there still is a risk of lethal shrapnel. We HIGHLY recommend our Caliber Anti-Spall add on. We have teamed up with our friends at Bullet Liner® to formulate an anti-spall coating specifically for our armor application. This addition to your steel plate gives you peace of mind when wearing steel armor. Weights for AR550 Steel Body Armor: 10 x 12 – 8 lb 7 oz with Anti-Spall Coating 8 x 10 – 5 lb 14.8 oz with Anti-Spall Coating 11 x 14 – 9 lb 13.3 oz with Anti-Spall Coating
Tactical Scorpion Gear - Level IIIA Body Armor Pair Hard 8
Tactical Scorpion Gear Level IIIA Body Armor Pair Hard 8" x 10" Plates | Stops .44 $74.95 $89.95
Tactical Scorpion Gear takes the Level IIIA armor plate to the next level with our new hard composite type plate. Tactical Scorpion Gear Level IIIA hard plate armor . Weights ( individual plate) 11×14: 5 pounds 9 ounces 10×12 : 4 pounds 2 ounce 8×10 : 2 pounds 14 ounces 6×8 : 1 pound 12 ounce 6×6 : 1 pound 5 ounces Features A stand alone armor plate with multiple hit capability minimal back impression as very strong plates . No shrapnel from this plate as captures the fragments inside 7/16 Inch thick Will fit most common carrier vests ( We manufacturer a full line of carrier vests) Composite type hard plate design Fully tested by independent Lab Rated for up to six hits from .44 magnum bullets For front and/or back protection Plate Size: 8 Inch x 10 Inch At Tactical Scorpion Gear they manufacture their own vest carriers, Kevlar level IIIA vests and all their other products.  Rated for up to five hits from .44 magnum bullets . Will withstand multiple hits from all pistol calibers. Tested by HP White laboratory ** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.** NIJ tested Level IIIA Armor will defeat 5 pistol round shots up to .44 magnum @ 1474 ft/s @ 17.3 FT.