All

SPECIFICATIONS Material: 500D Cordura® Nylon Supported Plate Size: 10”x12” Size: For body types M to XXL Weight: 2 lbs Features: Front and rear Velcro panels & laser-cut PALS systems Manufactured: Vietnam (AR500 Armor) AR500 Armor Veritas Modular Plate Carrier True to its name, the Veritas is as reliable a carrier as you can get thanks to its low weight and versatility. While the Testudo, this carrier’s brother product, is a heavy-duty carrier that maximizes comfort and coverage above all else, the Veritas was made with an emphasis on greater mobility, greater customization, and a lower price point; assets to make the Veritas accessible and dependable. Because nearly every component of the Veritas carrier is removable, making your loadout nimble and low-profile is just a few adjustments away. Additionally, turning a nimble loadout into a decked-out one is equally simple: This product is the main component of a modular armor system consisting of a Veritas skeletonized cummerbund, multi-caliber Kangaroo triple mag pouch, padded side-plate pouches, and Adaptive Plate Insert. The Veritas can also be equipped with our Abdominal (ABS) pouch which utilizes our steel or soft armor adding another 9.5x6 area of coverage when used in conjunction. Sometimes, you’ll be expecting to want a full loadout and be glad to wear all these features. But likely not all the time; for other situations, the coverage of just a carrier with front and back plates will be all you need. 500D Cordura® Nylon, bar-tacked at all stress points for high durability, makes up the majority of the carrier’s material. It also features a padded 3D mesh for comfort, ventilation, and customizability, including the ability to accommodate a cummerbund, side-plate pockets, and removable shoulder straps. On the carrier, there are also dual admin pockets with Hypalon® easy-to-grip pull-tabs and an upper admin pouch with elastic keepers. Front & rear Velcro® ID Panels allow you to further personalize your carrier with patches or other accessories.  Extremely adjustable, the Veritas can be made to fit from a Medium to an XXL. It is compatible with any trapezoid 10”x12” plates (square 10”x12” plates are slightly too large for the design) as well as any smaller sizes when used with an Adaptive Plate insert. SPECIFICATIONS Material: 500D Cordura® Nylon Supported Plate Size: 10”x12” Size: For body types M to XXL Weight: 2 lbs Features: Front and rear Velcro panels & laser-cut PALS systems Manufactured: Vietnam (AR500 Armor) *Note: The Veritas is designed only for 10”x12” trapezoidal plates and will not work with square plates.  

Qualities of Express T-Shirt Carrier: Maximum Concealment Super Lightweight All-Day Comfort Stretch Compression Material Easily Washable Express T-Shirt Carrier The Express T-Shirt carrier provides concealed protection and a superior fit to maximize effectiveness. Its sleek design easily fits to the body and under your clothes to provide the protection you need. Constructed with ultralight stretch compression material this Concealable Express T-Shirt Carrier was made to increase the user’s flexibility while maintaining safety in the field. Qualities of Express T-Shirt Carrier: Maximum Concealment Super Lightweight All-Day Comfort Stretch Compression Material Easily Washable What’s Included Concealable Express T-Shirt Carrier (armor sold separately)

Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ Ares Level IV Ceramic Body Armor - Set of Two Plates The Ares level IV ceramic body armor plate is our toughest and lightest level IV plate yet. With a boron carbide strike face and UHMWPE backer, the Ares is a military grade plate that has been laboratory tested and proven to defeat .30-06 M2AP armor piercing rounds. Boron carbide is one of the hardest materials known to man. However, it’s lighter than other softer ceramics such as aluminum oxide, which is used in most civilian grade body armor. The Ares is a superior level IV plate that is proudly manufactured in our Tucson, AZ facility. Lightweight Level IV Protection It’s no secret that speed, agility and stamina are critical during hostile engagements. While many level IV ceramic body armor plates weigh around 7 or 8 lbs per plate, the Ares weighs in at just 6.1 lbs per plate.  Not only does the Ares plate provide the operator with a clear weight advantage, but the boron carbide strike face easily destroys .30-06 M2 AP rounds upon impact. The lightweight UHMWPE backer catches the remaining bullet fragments preventing any penetration or secondary spall injury to the operator.  The Ares level IV ceramic body armor plate is the perfect choice for Law Enforcement, Security Contractors, Military, First Responders or even concerned civilians looking for advanced threat protection and safety. Full Edge-To-Edge ESAPI Protection Get what you're paying for with full edge-to-edge protection! The Ares provides maximum protection for vital organs in a full 9.5" x 12.5" medium ESAPI shooters cut profile. This allows for better protection to the operator in the event of near-edge impacts. The highly compatible ESAPI sizing gives the operator the freedom to choose from a wide range of plate carriers. The Ares features a traditional multicurve design for added comfort during extended duty use. Ares Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Boron Carbide Ceramic & UHMWPE Plate Size: 9.5”x12.5” ESAPI Protection Area: 9.5”x12.5” Weight: 6.1 lbs Thickness:1.2” Plate Quantity: Two (2) Plates Included Curve Profile: Multi Curve Cut: ESAPI Medium (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Cordura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ

The number of  MALICE CLIPS® needed for each AR500 Armor pouch. Note, pouches come with MALICE CLIPS so it’s not necessary to add them to your order, but it doesn’t hurt to keep a couple of sets on hand: Single M4 – 2 Long Double M4 – 2 Long Triple M4 – 4 Long QD IFAK – 2 Long Side Plate Pouches – 4 Long (2 per pouch) Small GP – 2 Long TQ Holster – 1 Long Holster – 2 Long and 2 Short Admin – 2 Short Triple Pistol – 2 Short Double Pistol – 2 Short Single Pistol – 1 Short Dump Pouch – 1 Short Shotgun Pouch – 2 Short SOB IFAK – 2 Short AR500 Armor Malice Clip MALICE CLIPS® are injection molded, heavy-duty, reusable connecting clips that are designed to attach modular pouches to MOLLE/PALS style equipment. FIGHT LIGHT MALICE CLIPS® are not affected by heat or cold, and will never corrode or lose their subdued finish. Once properly closed, the clip will not open until it is disengaged by the user using a flat tipped object such as a knife or screwdriver.  The number of  MALICE CLIPS® needed for each AR500 Armor pouch. Note, pouches come with MALICE CLIPS so it’s not necessary to add them to your order, but it doesn’t hurt to keep a couple of sets on hand: Single M4 – 2 Long Double M4 – 2 Long Triple M4 – 4 Long QD IFAK – 2 Long Side Plate Pouches – 4 Long (2 per pouch) Small GP – 2 Long TQ Holster – 1 Long Holster – 2 Long and 2 Short Admin – 2 Short Triple Pistol – 2 Short Double Pistol – 2 Short Single Pistol – 1 Short Dump Pouch – 1 Short Shotgun Pouch – 2 Short SOB IFAK – 2 Short

Highlights Durable: crafted from genuine Cordura® nylon, Hypalon® pull-tabs, and genuine Velcro®; reinforced bar-tacks at all stress points. Versatile: accommodates most single- and double-stack magazines, detachable & adjustable retention flap Light: Single weighs approx 1.6 ounces; double, 1.9 ounces; triple, 3.2 ounces Malice Clips: Single Pistol Magazine Pouch: one short (small) malice clip Double Pistol Magazine Pouch: two short (small) malice clips Triple Pistol Magazine Pouch: two short (small) malice clips AR500 Armor Multi-Caliber Pistol Magazine Single Pouch (MCPMP) The Multi-Caliber Pistol Magazine Pouch accommodates all common pistol magazines in single or double stack form from .22LR to .50AE, and everything in between, even Five-Seven! It’s the perfect companion to our Multi-Caliber Rifle Magazine Pouch. Secure, easy access to your handgun magazines Pouches are constructed from genuine 500D Cordura nylon, and retention flaps feature an easy-to-grip Hypalon® pull tab. The removable retention strap allows you to adjust for magazine capacity, size, and retention...or remove it entirely to run an opened-top configuration. Includes one, two, or three MALICE CLIPS®, as appropriate, to attach to your MOLLE-compatible platform. Highlights Durable: crafted from genuine Cordura® nylon, Hypalon® pull-tabs, and genuine Velcro®; reinforced bar-tacks at all stress points. Versatile: accommodates most single- and double-stack magazines, detachable & adjustable retention flap Light: Single weighs approx 1.6 ounces; double, 1.9 ounces; triple, 3.2 ounces Malice Clips: Single Pistol Magazine Pouch: one short (small) malice clip Double Pistol Magazine Pouch: two short (small) malice clips Triple Pistol Magazine Pouch: two short (small) malice clips

Features of Ballistic Helmet Level IIIA Protection: Level IIIA Stand Alone ABMM: Advanced Ballistic Matrix Materials Threat Protection: .357 SIG FMJ,.44 Magnum SJHP It also provides protection against most handgun threats, as well as the threats mentioned in (Types I, IIA, and II). 17gr. V50 2185 fps Multi-hit capabilities Head protection: Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 4 pt Harness Padding: Interior 7 pad ACH/MICH system provides unique impact protection Ballistic Helmet Level IIIA The Body Armor Direct Level IIIA Helmet is designed as an alternative to the U.S. Milspec MICH helmet, utilizing the most advanced ballistic protection against handgun ammunition. The shell is comprised of multi-layered advanced composite. The harness assembly consists of the MICH Comfipad Suspension System and a four point harness with a leather lined chin strap. The reduced profile enables a wider peripheral and upward field of view for better situational awareness and unrestricted movement; and also accommodates protective goggles. night vision goggles (NVG) and a communication system. The helmet can be fitted with ballistic or riot visors.  This Helmet is designed utilizing the most advanced ballistic protection against handgun ammunition. The Helmet is a Kevlar based pressed processed material. Features of Ballistic Helmet Level IIIA Protection: Level IIIA Stand Alone ABMM: Advanced Ballistic Matrix Materials Threat Protection: .357 SIG FMJ,.44 Magnum SJHP It also provides protection against most handgun threats, as well as the threats mentioned in (Types I, IIA, and II). 17gr. V50 2185 fps Multi-hit capabilities Head protection: Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 4 pt Harness Padding: Interior 7 pad ACH/MICH system provides unique impact protection What's Included: 1 Qty. helmet with armor, harness etc. as detailed above and selected

Patriot Tactical Carrier Introducing the Body Armor Direct wrap around Scalable Patriot Tactical Carrier. Manufactured in the USA it features adjustable shoulders for improved fit, front and back 10" x 12" plate pockets, 11" x 3" area for a patch. WHAT IS INCLUDED: 1 Qty. Patriot Tactical Carrier

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      Spartan Armor Systems ® Hercules Level IV Ceramic Advanced Compound Curve Body Armor -  Set of Two Plates   Product Overview The Hercules level IV body armor plate is manufactured in-house at the Spartan Armor Systems® facility in Tucson, AZ utilizing ballistic ceramic and UHMWPE materials. As with all body armor manufactured by Spartan Armor Systems®, the Hercules level IV ceramic body armor plate has been independently tested and verified by an NIJ Certified laboratory. Each Hercules level IV body armor plate is rated to stop armor piercing rifle rounds up to .30-06 M2 AP. Weighing in at just 6.9 lbs per plate, the Hercules is noticeably lighter than most level IV ceramic body armor plates available. With full edge-to-edge 10”x12” coverage and Advanced Compound Curve design, the Hercules is ideal for operators in need of maximum protection and comfort.    Full Edge-To-Edge Protection Get what you pay for! It might not be obvious, but some 10”x12” level IV ceramic body armor plates on the market only provide protection in a 8”x10” area to keep manufacturing costs low. However, the Hercules ceramic body armor plate provides full 10”x12” edge-to-edge protection for the operator. When your life is on the line, don’t take chances with other ceramic plates that measure 10”x12”, but only provide an 8”x10” area of protection. Buy ceramic level IV body armor plates that give you the protection you’re paying for.     Advanced Compound Curve - True Multi-Curve Design The Hercules level IV body armor plate features our Advanced Compound Curve (ACC). While many body armor plates claim to be “multi-curve”, the ACC profile is a true multi-curve design providing the operator with the most comfortable fit of any ceramic level IV body armor plate. This advanced ergonomic design is especially important during extended duty engagements, typical of Law Enforcement, Security, and Military operations.   Product Specifications  Threat Protection: Armor Piercing Rifle Rated Up To .30-06 M2 AP. NIJ 0101.06 Rating: Laboratory tested and verified to meet NIJ 0101.06 level IV standards. Material Composition: Ceramic & UHMWPE Plate Size: 10”x12” Protection Area: 10”x12” Weight: 6.9 lbs Thickness: 1.1” Plate Quantity: Two (2) Plates Included Curve Profile: Advanced Compound Curve Cut: SAPI/ESAPI (Shooters Cut) Armor Type: Stand Alone Exterior: 1000D Condura® with Embroidered Logo Warranty: Guaranteed against manufacturer defects 5 years from the date of purchase. Origin: Made in U.S.A - Manufactured by Spartan Armor System® in Tucson, AZ.   NOTE: Ceramic armor cannot be resold, therefore ALL sales for this product are final. No returns or exchanges accepted.

Leonidas Legend XL Limited Edition Black Multicam Plate Carrier - MADE IN USA   Product Overview  True to its lineage, the second-generation Leonidas plate carrier is designed to meet the most rigorous demands of the modern operator. Enhanced with lightweight Squadron laser-cut laminate material over a Cordura 500D body, the Leonidas Legend plate carrier is built to last. The Leonidas Legend features effective thin and lightweight high density foam standoffs for air circulation, enhanced shoulder pads, quick release cummerbund and many more upgrades.    Black Multicam & Blackout Edition The Leonidas Legend XL is a rugged, but lightweight carrier designed for larger body types ranging from Large to 3XL. This limited edition plate carrier is available in standard Black Multicam as well as a special "Blackout" edition which features black laser cut laminate Squadron over a Black MultiCam body. Both versions of the Leonidas Legend XL come with two sets of shoulder pads: 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing.   Built for Battle  With enhanced padding in the front, back and shoulders, the Leonidas Legend is designed to minimize fatigue and maximize comfort during extended duty use. The tough, but soft, spacer mesh helps this carrier breathe while facilitating heat dissipation. The fully adjustable (and removeable) cummerbund provides 7 levels of adjustment, allowing for a variety of body types ranging from L to 3XL. High abrasion laminate exterior panels not only provide a super low profile mounting solution but reduces weight while shielding the 500D Cordura body. The Leonidas Legend comes standard with mole side plate pouches capable of holding 6”x6” or 6”x8” armored side plates. Each shoulder pad also features multi-directional laser-cut webbing to allow for greater freedom in mounting and retainment options. First Spear Tubes are integrated into the cummerbund to allow for faster dawning and removal of the carrier. The top zippered admin pouch is capable of holding smartphones up to 6.5” long. Additional storage is also provided by way of the front kangaroo pouch which is retained by Velcro. The Leonidas Legend plate carrier is proudly made in the U.S.A. and 100% Berry Compliant making it an ideal choice for Law Enforcement, Military or Concerned Citizens alike.    Other Features  Made in the USA and Berry Compliant  Designed to hold 10”x12” or 9.5”x12.5” SAPI/ESAPI plates  Includes 2 sets of shoulder pads, 1 set of enhanced shoulder pads with extra padding and 1 set of standard, low profile shoulder pads with bi-directional webbing  Mil Spec Construction 500D Codura and lightweight Squadron Laminate materials   Reinforced Rear drag handle with retainment Velcro  First Spear Tube Technology for easy cummerbund release and re-dawning without having to readjust cummerbund sizing  Hook and Loop front and back ID panels with laser cut PALS webbing  Bungee sizing system allows cummerbund to adjust from XL to 3XL  Cummerbund accepts Spartan Armor Systems 5” x 15” soft armor inserts  Removeable cummerbund with secondary retainment straps allows carrier to be run without cummerbund  Front Velcro kangaroo pouch   Chest and back padded standoffs increase airflow without producing hotspots  Included molle side plate pouches designed to hold 6”x6” or 6”x8” side plates  Top zippered admin pouch      SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SHOOTERS CUT SET OF TWO    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.     Protective Value Added    We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened   Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.   Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.    Laser Cut to Protect Ballistic Integrity   All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.    Blazing The Trail of Innovation  Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!   Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Plate Weight (per plate):    9.5”x12.5” AR550 Shooters Cut Single Curve Full Coat = 9 lbs 5 oz.    Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness   Side Plate Weight (per plate):    6×6 approximately 2lbs 9oz (base coat), 2lbs 11oz (full coat), 6×8 approximately 3lbs 6 oz (base coat), 3lbs 12oz (full coat).    AR550 Body Armor - Shooters Cut Specs:   Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only       See a Comparison of Our Full Line of Body Armor:             Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:       Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.       The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.      

SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SINGLE PLATE With Base Coat Corrosion Protection    Product Overview Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties. Protective Value Added  We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating, click here to learn more. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection.    Battle Hardened Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming. Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.   Laser Cut to Protect Ballistic Integrity All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue.At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake.    Additional Protection: Full Coat or Base Coat Options We strongly recommend choosing our full coat option when you buy steel core body armor. Our proprietary plate coating, Encapsaloc™, is a potentially life-saving feature that captures spalling as a result of ballistic impacts on the strike face of the steel core armor plate. Do not settle for steel armor that is merely coated with generic truck bed liner spray coatings that have not been tested for ballistic efficacy. The strike face of our Spartan Armor Systems® AR550 Body Armor plates proudly bears the mark of our Spartan logo.   IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.   Blazing The Trail of Innovation Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly! Configuration: This armor comes as a pair, meaning you will receive both front and back plates.   Shooters Cut Plate Weight (per plate): 8”x10” AR550 Shooters Cut: Base Coat 5lbs 5oz. Full Coat 6lbs 1oz. 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz. Full Coat 8lbs 10oz. 11”x14” AR550 Shooters Cut: Base Coat 9lbs 15oz. Full Coat 11lbs. Swimmers Cut Plate Weight (per plate): 8x10 AR550 Swimmers Cut: Base Coat 4lbs 6oz. Full Coat 4lbs 14oz. 10x12 AR550 Swimmers Cut: Base Coat 6lbs 10oz. Full Coat 7lbs 8oz. 11x14 AR550 Swimmers Cut: Base Coat 8lbs 5oz. Full Coat 8lbs 13oz.   Thickness: .25″ AR550 plus approximately .25″ coating makes this slim profile plate overall .5-.6″ in total thickness Side plates also available in 6”x6” and 6”x8” sizes, click here to learn more.    AR550 Body Armor - Shooters Cut Specs: Made in U.S.A. Special Threat Tested to Level III+ Standards Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™  Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only   See a Comparison of Our Full Line of Body Armor:     Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.        

SPECIFICATIONS Material: Level IIIA: Honeywell Spectra Shield®, Gold Shield®, and other ballistic fabric. Level III: AR500 Steel, with FragLock™ Coating  Protection  Level IIIA: .357 SIG FMJ Flat Nose bullets (8.1g & 1470 ft/s (+/- 30 ft/s)) & .44 Magnum SJHP (15.6g).  Level III: 7.62 mm FMJ, steel jacketed bullets (M80) (9.6g & 2780 ft/s (+/- 30 ft/s)) Capability Level IIIA: multi-hit protection Level III: edge-to-edge multi-hit protection  Size & Weight 9.5" x 6" Level IIIA: 0.5 lbs & 0.31" thick Level III: 4 lbs Shelf life  Level IIIA: 5 years Level III: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers; attached with ABS pouch. Manufactured: United States AR500 Armor Abdominal Armor Our standard plate and carrier covers vitals such as your heart and lungs but weren’t designed to cover the lower torso. That’s where this plate comes in: AR500 Armor developed the Abdominal Ballistic System (specifications below) to provide even more protection in addition to the coverage provided by the standard carrier/plate combo. The ABS attaches to the bottom of your carrier so it can move independently of the top plate. This gives you unhindered flexibility while still providing full torso coverage. Specifically, the ABS attaches the abdomen plate via our unique pouch design (sold separately), integrating into your plate carrier’s cummerbund flap or inner plate pocket. It is secured with Velcro or optional modular attachment straps, providing a natural and adjustable fit with your existing body armor. As noted above, there are two versions of this armor to choose from: The Hybrid IIIA soft armor emphasizes mobility by utilizing the latest ultra-light, thin, flexible, and high-strength materials on the market, such as Honeywell Spectra Shield®, Gold Shield®, and other ballistic fabric from respected manufacturers. At just eight ounces, it’s a burdenless addition to your setup for more coverage. On the other hand, the Level III Steel armor emphasizes protection, being able to stop 7.62x51 M80 NATO Ball (.308 Winchester) as well as 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS, in accordance with NIJ 0101.06 standard. It also features the same natural curve of our full-size curved armor plates and our FragLock build-up coat for spall and fragmentation mitigation. SPECIFICATIONS Material: Level IIIA: Honeywell Spectra Shield®, Gold Shield®, and other ballistic fabric. Level III: AR500 Steel, with FragLock™ Coating  Protection  Level IIIA: .357 SIG FMJ Flat Nose bullets (8.1g & 1470 ft/s (+/- 30 ft/s)) & .44 Magnum SJHP (15.6g).  Level III: 7.62 mm FMJ, steel jacketed bullets (M80) (9.6g & 2780 ft/s (+/- 30 ft/s)) Capability Level IIIA: multi-hit protection Level III: edge-to-edge multi-hit protection  Size & Weight 9.5" x 6" Level IIIA: 0.5 lbs & 0.31" thick Level III: 4 lbs Shelf life  Level IIIA: 5 years Level III: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers; attached with ABS pouch. Manufactured: United States

Spartan Armor Systems Active Shooter Kit With Level III+ AR550  Spartan Armor Systems AR550 Body Armor with Hydra Plate Carrier. This active shooter kit set up is designed to allow a quick response time and comfortable performance fit with superior Level III+ Rifle Rated Protection. Carrier includes emergency drag handle, quick cinch adjustments for the front and hook and loop adjustments on the shoulders. The Spartan Armor Active Shooter Kit is perfect for rapid response situations.  Our AR550 body armor is NIJ level III rated but has undergone special threat testing to achieve a level III+ rating. NIJ Certification applies to AR550 Shooters and Swimmers Cut Single Curve Full Coat armor plates.  Why Are Your AR550 Single Curve Full Coat Plates Labeled as Level III?  Spartan AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. Level III+ indicates special threat testing and was created by the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high velocity penetrator rounds such as M855 (aka green tips). While Spartan AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic steel and have been special threat tested to level III+. Quite simply, the NIJ requires that we label AR550 single curve full coat plates as level III even though they are capable of higher ballistic protection.   The Hydra Plate Carrier is a highly adaptable carrier ideal for quick deployment and emergency situations such as active shooter scenarios. Easily adjustable buckles ensure a snug and comfortable fit on the sides. Ample length shoulder straps allow the Hydra plate carrier to be easily adjusted to fit a wide variety of body types. Breathable mesh is used at chest, back and shoulder contact points to allow for maximum breathability. The Hydra plate carrier is a great choice for anyone looking for a lightweight and versatile body armor configuration. Front map pocket Emergency drag handle Removable padded mesh shoulder pads with hook and loop guides Adjustable shoulder straps Hook and loop webbing Heavyweight webbing for modular attachments Padded mesh interior lining Quick adjust cinches Quick release buckles Easy access plate pockets Waist Size: 30″ – 46″ adjustable sizing Accepts traditional Medium or Large SAPI plates up to 10.25″ x 13.25″. Best fit for our shooters cut and swimmers cut AR500 and AR550 body armor. This package includes our Level III+AR550 10x12 Armor. 1/4" thickness and provides the operator with Level III+ protection IAW NIJ0101.06 standards.      Our Level III+ AR550 Armor has been tested to go beyond the Level III testing protocol (6 shots .308/M80 Ball, 2780 fps).  Special Threat Ratings: SS109/M855 3505 fps 6 shots 30-06 up to 2,719 fps     With all of our AR550 Spartan Armor Systems™ products, we only use ballistic LAB CERTIFIED AR550! All purchases of our Spartan Armor products have current lab certificates and secondary ballistics available on request. Remember, not all body armor is created equal!  Coating Options:  Choose the Full Coat option to have the plate lined with 1/4-3/8 of our proprietary coating, Encapsaloc ™.  The result is a plate approximately 1/2-5/8” total thickness.  See our FAQ for more information about our Encapsaloc ™ process. The base coat option has an extremely thin layer of our fragmentation mitigation coating to aesthetically enhance the plates, and to provide corrosion resistance. This coating has minimal, if any, fragmentation mitigation capabilities. To learn more check out our blog on the coating options: https://www.spartanarmorsystems.com/blog/encapsaloc-fragmentation-mitigation-antispall-body-armor-coating/   Chest Plate Weight (per plate): 10x12 AR500 Omega Armor Shooters Cut: Base Coat 8lbs 7oz. Full Coat 9lbs 3oz.      Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR) - US Export Regulations:   Level III and IV rifle rated body armor (Rifle Plates) fall under jurisdiction of the Export Administration Regulations (EAR) and International Traffic in Arms Regulations (ITAR), and are subject to the export control laws of the US Government. Export or re-transfer of Rifle Plates by any means to any foreign end user or for any other end use, whether in the US or abroad without written approval of the US Department of Commerce or Department of State is prohibited.   The sale, transfer, transportation, or shipment outside of the US of any product prohibited or restricted for export without complying with US export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Spartan Armor Systems, TK Armor Systems, LLC will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products.         *******All products available on this category are sold under and branded under Spartan Armor Systems ™ The Target Man’s /Spartan Armor Systems AR500 Omega Armor products are manufactured from genuine, lab-certified AR500 ballistic grade steel. None of the products available on this website are sourced from, sponsored or approved by, affiliated with or in any way connected with Armored Republic, LLC.

Shellback Tactical Banshee Active Shooter Kit with IV 1155 Plates The Shellback Tactical Banshee Active Shooter Kit with Level IV 1155 Plates is a cost effective solution for active shooter preparation and response.  This kit provides protection against both hand gun and rifle rounds.  Kit Components  Shellback Tactical Banshee Rifle Plate Carrier® x 1 Shellback Tactical Prevail 1155 Level IV 10 x 12 Hard Armor Plates x 2  Banshee Rifle Plate Carrier® Features  Constructed of durable 500 Denier nylon  Holds 10 x 12 shooter or SAPI cut ballistic plates  Removable cummerbund with interior and exterior PALS for side plates Cummerbund accepts 13.75" x 5.5" soft armor inserts  Quick release secondary securing system Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest. Fully adjustable and padded front, back and shoulder areas. Two areas of loop on front and rear for id placards Front pocket accepts kangaroo inserts  Heavy Duty bar tacking at key stress points Wire, antenna or hydration hose guides Low profile design for mobility  Rear drag handle  Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED Lifetime warranty  GSA and TAA Compliant  Level IV 1155 Plate Features NIJ 0101.06 Certified  10" W x 12" L x 1"D Weight - 8.3lbs  SAPI Cut  Made of Monolithic ceramic and polyethylene  Made in the USA  10 Year warranty on ballistics  Stopping Power  .357 SIG FMJ 9MM .38 40S&W .45 ACP .223 BALL  5.56 X 45  7.62 X 39 BALL  7.62 X 51 M80 NATO  M855/SS109 7.62 X 63 M2AP  LEGAL THIS IS A ITAR CONTROLLED ITEM AND WILL ONLY BE SHIPPED TO US ADDRESSES.  DUE TO THE NATURE OF THE ITEM - ALL SALES ARE FINAL. 

In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility AR500 Armor Level III Lightweight UHMWPE Body Armor 10" x 12" There is a saying in the backpacking community, “take care of the ounces, and the pounds will take care of themselves.” When weight and mobility are everything in your body armor, the AR500 Armor® Level III ultra-high molecular weight polyethylene plate is the clear choice. Ultra-light Level III protection Our UHMWPE (aka PE) plate weighs a mere 3.5 pounds in our 10”x12” standard shooters cut. This stand-alone plate is tested to NIJ 0101.06 Level III threats and is multi-hit capable. It is manufactured in Phoenix, Arizona, and carries a 5-year shelf life. Our new PE lightweight armor plate is a great choice for those whose primary concern is weight.  In addition to stopping the 7.62x51 M80 Ball at 2780 FPS, our PE plate has also been Special Threat tested against the following rounds: 5.56x45 M193 at 3150 FPS 7.62x39 AK-47 at 2380 FPS Highlights Peace of mind: Tested to NIJ Standard 0101.06 Level III and is multi-hit capable  Confidence: stops high-velocity military 5.56 and .30 caliber ammunition Safety: At 3.5 pounds, our PE plate is neutrally buoyant Specifications Tested to Level III threats 10”x12” plate weighs only 3.5 lbs Stand-Alone and Multi-Hit capable 1” Thick Profile Ergonomic Multiple Axis Curvature Durable polyurea coating seals out water and the elements Made in our Phoenix, Arizona, facility Note: Due to its size and profile, this plate currently fits in our Testudo Gen 2.0 and AR Independence carriers only.

IFAK Refill contents: 1 x SWAT-T 1 x Hyfin compact twin chest seal 1 x Celox EMS 1 x NAR Responder Bandage 1 x Compressed Gauze 1 x Trauma Shears 1 x H&H Duct Tape 1 x NAR Bear Claw Gloves 1 x Casualty Card 1 x Marker AR500 Armor AR Individual First Aid Kit (IFAK) The AR500 IFAK Refill is designed to resupply our regular and quick-detach IFAK pouches. Everything you need and nothing you don't Our IFAK Refill is compact and portable. This refill includes the necessary tools to treat life-threatening bleeding wounds such as gunshots, knife/stab wounds, or other serious bleeding injuries including arterial bleeding. IFAK Refill contents: 1 x SWAT-T 1 x Hyfin compact twin chest seal 1 x Celox EMS 1 x NAR Responder Bandage 1 x Compressed Gauze 1 x Trauma Shears 1 x H&H Duct Tape 1 x NAR Bear Claw Gloves 1 x Casualty Card 1 x Marker

SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States AR500 Armor Level III Body Armor With Build Up Coat Essential protection ought to be affordable and reliable, which is why AR500 Armor is proud to offer one of the most cost-effective plates on the market with our Steel Level III (specifications below): An AR500 Steel plate, cut in our patented Advanced Shooters Cut shape and design, and covered with an exclusive FragLock™ Coat, in Base and Build-Up forms.  Our Level III Steel, unlike ceramic or polyethylene alternatives, is capable of protecting against several direct hits while still being less bulky than competing materials. It also has been independently tested in accordance with NIJ 0101.06 threat levels through Oregon Ballistics (OBL), and H.P. White Laboratories. This means it is rated to stop 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS, and special threat tested to stop 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS. A benefit not elsewhere found in the industry, the Advanced Shooters Cut shape affords you additional room for your rifle stock, improving comfort and shooting ergonomics; this is available in right and left-handed configurations. It is also compatible with all standard plate carriers that accept SAPI or traditional Shooters Cut body armor, given there is an appropriately sized chest plate pocket. Finally, the FragLock™ Coat is a unique feature that guarantees two benefits: First, it gives a twenty-year maintenance-free shelf life - making this steel plate far outlast ceramic or polyethylene alternatives. Second, the coating mitigates the dangers of spalling (when pieces of steel fragment off) and fragmentation (when the bullet’s remains fragment off), protecting the wearer from both the direct ballistic impact and the aftermath of the impact. The Build-Up Coat features stronger protection with the tradeoff of greater weight and size, while the Base Coat is lighter and thinner with less protection. SPECIFICATIONS Material: AR500 Steel, with FragLock™ Coating Protection: 7.62x51 M80 NATO Ball (.308 Winchester) at a velocity of up to 2,780 FPS and 5.56mm M855/SS109 (Green Tip) at a velocity of 2,780 FPS Capability: Edge-to-edge multi-hit protection  Dimensions: 10”x12” Base Coat Weight: 8.7 lbs Thickness: 0.26" Build-Up Coat Weight: 9.7 lbs Thickness: 0.48" 11”x14” Base Coat Weight: 10.7 lbs Thickness: 0.26" Build-Up Coat Weight: 11.7 lbs Thickness: 0.48" Shelf life: 20 years Compatibility: Testudo, Veritas, Valkyrie, Independence & Invictus Carriers Manufactured: United States

SPECIFICATIONS Material: Heavy-duty webbing and Hypalon® pull-tab Dimensions: 8" x 2.5" x 0.75" Weight: 2 ounces Features: heavy-duty elastic and Velcro® ensures your ammo will be where you put it when you need it. AR500 Armor Shotgun Card Our shotgun card is designed to hold seven rounds of 12-gauge shotgun ammunition in an easily accessible manner. Seven rounds, no waiting Made of heavy-duty 2” webbing, the shotgun reload card attaches to any loop Velcro® platform, such as the Velcro on our plate carrier webbing or i.d. area, or the side of your shotgun receiver with similar loop Velcro attached to it. Weighs only 2 ounces and is 8”x2.5” in size. SPECIFICATIONS Material: Heavy-duty webbing and Hypalon® pull-tab Dimensions: 8" x 2.5" x 0.75" Weight: 2 ounces Features: heavy-duty elastic and Velcro® ensures your ammo will be where you put it when you need it.

SPECIFICATIONS Material: 500D Nylon Supported Plate Size: 10”x12” Size: For body types M to XXL Weight: 2.2 lbs Features: Collapsible carry handle, large Velcro ID panels Manufactured: Vietnam (AR500 Armor) & Berry Compliant Highlights: Berry compliant: 100% designed, sourced, and manufactured in the USA Durable: genuine Cordura® 500D nylon construction, bar-tack stitching at all stress-points and webbing, front-mounted, quick-release buckles with laminated nylon protective covers Adaptable: dual admin pockets w/laminated nylon pull tabs Comfortable: adjustable cummerbund with Velcro® inner lining, mesh padded removable shoulder pads. Built-in front and rear inner lining plate pocket padding. Fits sizes M-XXL AR500 Armor Valkyrie™ Plate Carrier The Valkyrie™ Plate Carrier (specifications below) was designed to be a 100% Berry compliant plate carrier that provides the same quality as upper-tier plate carriers at a more modest price. The Valkyrie is compatible with all 10”x12” trapezoidal steel, ceramic, or polyethylene body armor, and features everything you’d expect in a top-of-the-line carrier. From its dual admin pouches compatible with our Kangaroo magazine pouch insert, fully adjustable cummerbund and generously sized Velcro ID panels, the Valkyrie brings together the ideal balance of quality components and craftsmanship, ergonomics, and comfort. SPECIFICATIONS Material: 500D Nylon Supported Plate Size: 10”x12” Size: For body types M to XXL Weight: 2.2 lbs Features: Collapsible carry handle, large Velcro ID panels Manufactured: Vietnam (AR500 Armor) & Berry Compliant Highlights: Berry compliant: 100% designed, sourced, and manufactured in the USA Durable: genuine Cordura® 500D nylon construction, bar-tack stitching at all stress-points and webbing, front-mounted, quick-release buckles with laminated nylon protective covers Adaptable: dual admin pockets w/laminated nylon pull tabs Comfortable: adjustable cummerbund with Velcro® inner lining, mesh padded removable shoulder pads. Built-in front and rear inner lining plate pocket padding. Fits sizes M-XXL

SPECIFICATIONS Material: 100% Cotton Sizes: Small, Medium, Large, X-Large, and XX-Large AR500 Armor T-Shirt We're proud to offer a line of T-Shirts. As with all of our products we take quality and value into consideration. Offering the highest quality armor at affordable prices; our T-Shirts are no exception. The AR500 T-Shirt is 100% Cotton and designed for comfort. Soft and smooth to the touch, these T-Shirts feature a tag-less printed label and smooth collar seams. Wear the Flag and our Logo with pride!   SPECIFICATIONS Material: 100% Cotton Sizes: Small, Medium, Large, X-Large, and XX-Large  

Highlights: Peace of Mind: Offers the extra protection of our Level III plate or Level IIIA hybrid soft armor panels. Comfort: Designed to flex independently of the plate carrier, allowing for moving, kneeling, or changing positions AR500 Armor ABS Pouch AR500 Armor® ABS Pouch was developed to satisfy the growing demand for modular protection of the abdominal area. In situations where extended protection is desired, the ABS pouch has got you covered. Abdominal protection that maintains mobility The ABS pouch attaches to your plate carrier using the Velcro integrated into the cummerbund flap or inside of the plate pocket. A large attachment flap allows for user adjustable extension of your armor for a precise fit. PALS webbing on the front allows for attaching small MOLLE-compatible pouches (though we recommend something small and light to maintain mobility) Highlights: Peace of Mind: Offers the extra protection of our Level III plate or Level IIIA hybrid soft armor panels. Comfort: Designed to flex independently of the plate carrier, allowing for moving, kneeling, or changing positions